Skip to content

Country

Happymodel Mobula7 1S HD - 75mm Micro Whoop FPV Racing Drone with ELRS BNF, 0802 20000KV Motor & RunCam Split3-Lite 1080P Camera DVR - Perfect for Drone Racing Enthusiasts

Current price $257.99
Original price $338.99
Original price $338.99 - Original price $368.99
Original price $338.99
$257.99 - $257.99
Current price $257.99
  Free Tracked Shipping     Easy 30 Day Returns  
Availability:
in stock
Availability:
Low stock
Receiver: 2.4GHz ELRS SPI

Dispatch & Shipping

Usually dispatches within 24 hours.
Free Tracked Shipping. Delivery estimates are provided at checkout.

Returns

This product qualifies for our 30 day return policy.

PayPal Icon
Mastercard Icon
Visa Icon
Apple Pay Icon
Shop Pay Icon
Google Pay Icon
Amex Icon

Product Description:

Introducing the Mobula7 1S HD 75mm Whoop Drone

The Mobula7 1S HD version is a lightweight and efficient 75mm brushless whoop that provides 1080P high-definition video recording capabilities. Featuring a highly integrated All-In-One (AIO) flight controller supporting ESC with a maximum current output of 12A, this drone is a top choice for capturing stunning aerial footage. With added blackbox support for gyroflow stabilization, enjoy safe and smooth flights while recording high-quality videos.

Notable Features

  • X12 5-IN-1 AIO flight controller
  • VTX Power up to 400mw ELRS V2.0 Support
  • NEW RS0802 KV20000 motors
  • 1080P HD Video record
  • Blackbox Ready support GYROFLOW
  • Smooth and powerful performance
  • Compatible for 1S Lipo/LIHV
  • Recommended 1S 450mah/550mah/650mah batteries (Not included)

Specifications

  • Brand Name: Happymodel
  • Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone
  • Wheelbase: 75mm
  • Size: 99mm*99mm*45.5mm
  • Weight: 33g
  • Receiver option: SPI 2.4GHz ELRS V2.0 / SPI Frsky D8/D16

Motor Specifications

  • Mode: RS0802 KV20000
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm
  • Weight: 2.0g
  • No. of Cells (Lipo): 1S only

Propeller Specifications

  • Weight: 0.24g
  • Material: PC
  • Pitch: 1 inch
  • Props Diameter: 40mm
  • Center Thickness: 5mm
  • Center Hole Diameter: 1.5mm
[The rest of the specifications]

Package Contents

  • 1x Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)
  • 1x Flight Controller AIO ESC Receiver vtx
  • 4x RS0802 KV20000 brushless motor
  • 2x Gemfan 1610-2 bi-blade propellers CW
  • 2x Gemfan 1610-2 bi-blade propellers CCW
  • 1x Runcam Split3-Lite Camera
  • 1x External Blackbox Module supporting gyroflow
  • 1x Propeller disassembly tool
  • 1x 1S series balance charging board

Product Specifications

Motor Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only
Propeller Weight:0.24g
Material:PC
Pitch:1 inch
Props Dia:40mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight Controller X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC
Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200
Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire length 30mm
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 receiver Version

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire length 30mm
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

Onboard 5.8g OPENVTX
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Runcam Split3-Lite

Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

External Blackbox

Size:18*15.5*4.5

With Built-in Voltage booster module

Weight:1.5gram

SD Card support max to 32GB

SD Card need to use FAT32 Format

Notes: Need to careful to insert the TF SD Card , and don't pull it out while install the battery.

Product Images


Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Shop Thousands of Products

In stock and ready to dispatch.

Easy 30 Day Returns

Easily manage returns via your account.

Free Tracked Shipping

Included with every Shopsta order.

A+ Customer Support

We’re committed to great service.